MINGER RGB LED Strip Lights 10m/32.8ft


Decorate your home vividly.

SKU: H61891A1

    Technical Specs:
  • Color: RGB
  • Length: 2 X 16.4ft / 2 X 5m
  • Control Way: IR Remote
  • Power Supply: Adapter
  • Waterproof: NO

1. LED Strips: 5050 RGB LED strip light has 300led with 2 rolls of 5m(16.4ft) 150leds. The strip is not waterproof, can be used indoor.

2. Easy Installation: The flexible lighting strip kit includes all essential parts for installation, you have no need for other accessories unless you want to do DIY work. This led strips can be cut between every 3 LEDs.

3. Color Changing: Led tape light will change colors and speed automatically and periodically. It creates great led mood lighting for you.

4. Application: With these LED lights you can light up your party such as weddings, birthday party, school party and other decoration.

5. Package Content: 2 x 5m(16.4ft) MINGER LED Strip Light; 1 x Power Supply; 1 x Remote Controller; Zero-Risk Purchase,90 Days 100% Satisfaction Guarantee and Our Friendly Service - 24 hours email customer service response.

Customize Room

With several lighting modes and multiple colors, you can change the room into various styles. Dim the light and set a favorite color. Immerse yourself in the romantic ambiance.

Decorate Kitchen

Super bright 5050 LEDs bring you vivid lighting. Colorful cupboard actives your mood when cooking. Have a great meal with your families in warm, cozy atmosphere after a busy day.

Bar Lighting

32.8ft (2 x 16.4ft) strip light is long enough to decorate any bar counter. High flexibility makes it a breeze for corner setup. Enjoy fine wines alone in relaxation or cheers with your friends in cool lighting.


1.Why my strip light is not turning on when plugged?

Please make sure that the pin connection are connected arrow to the arrow at same side. Please make sure the little arch card on the light strip connector should match the bulge on the control box connector.

2.Why my remote is not working/ controlling the LED light strip?

Please make sure that your strip light is ON when plugged, firstly. Then pull out the remote insulated label when you use the remote; The remote should be faced with the raised-out IR receiver of the control box. Change a new CR-2025 battery to test.

3.How to cut the light strip and reconnected it?

You can cut RGB strip light along the marked lines. And you may need to buy 4 pin strip light connectors to connect the cutting pieces with original sections if you cut it.owever, It's not recommended to cut Dreamcolor light strip since the leds are controlled by individual IC.

4.How to connect the multi light strips together?

It's not recommended to connect multi light strips in a line because of the power issue.


Lighten Up


from Roger VanceFebruary 14, 2019

I used a single kit for the fixture in the video. I was able to mount the small sensor for the remote at the bottom and concealed the electronics in the box. Bought an extra double kit to back light my audio-video equipment at a future date. This is a great value compared to lesser kits on the market. Assembly is intuitive and simple. I did not use the adhesive backing, but advise care in preparing any surface before doing so. Also includes hangers. Excellent and recommended. Update: There are several programming functions on the remote that I couldn't figure out, so I replied to Minger's follow-up email. Within hours Sumi responded with an attachment of simple instructions. Nice.

Happy with product, good customer service


RachelJuly 11, 2019

This product works great for me. I noticed a lot of reviews saying the more strips of lights you connect, the duller it gets towards the ends. I bought two boxes (which gives you 4 strips) and connected them all together, I noticed the dullness at the end too, but when I connected the second adapter to that end and plugged it into wall, it fixed it and it was the same brightness all around. About two weeks in one of the wall plugs stopped working, so I emailed customer support and they sent a brand new kit with a new adapter and now everything is working just fine. It was easy enough for one person to install. I’ve been using these lights for almost a month and aside from the issue with the wall plug, I am very happy with this product. Would recommend.

Easy to install


MaryMarch 9, 2019

Easy to install, my 14 teen yr old did it herself, at 1st I had forgotten to turn them on, then she realized it and was super easy