Decorate your space with vibrant colors.
SKU: H6140010
1. LED Strips: LED strip lighting has 150 RGB 5050 SMD Leds in 16.4ft with dimmer and brightness controls, and with 44 key IR remote controller and 12V 1.5A power adapter. The strip is Waterproof, can be used indoor or outdoor decoration.
2. Multi-Color & DIY: LED tape strips lights set will change colors and speed automatically and periodically. It has not only RGB (Red,Green,Blue),16 multicolored options, but also has DIY selection to create your great led mood lighting.
3. Good & Full Material: Using double layer copper on PCB board to keep the mixed colors more even. LED IR remote controller has over charging, short circuit protection and memory function. Power supply makes sure the safety for adults and kids.
4. Easy Installation & Use: Led rope lights can be cut between every 3 leds. 3M self-adhesive tape can be fit on any dry and flat surface.
5. Package Content: 1 x MINGER LED Strips; 1 x 44 key remote controller; 1 x IR control box; 1 x power supply; 1 x user manual; zero-risk purchase, 90 days 100% satisfaction guarantee and our friendly service - 24 hours email customer service response.
16.4ft strip light is long enough to decorate your kitchen counter. High flexibility makes it a breeze for corner setup. Have a great meal and fine wines in relaxing ambiance.
Adjustable brightness and multiple colors enable you to DIY the bedroom. Dim the light and set a favorite color by remote controller without leaving your bed. Enjoy the peace and then fall asleep slowly after a busy day.
Turn on the music when your party begins. Dance with your friends in dynamic lighting mode and vibrant light colors. A must-have to fire up the party. It creates a wonderful party time for you!
Please make sure that the pin connection are connected arrow to the arrow at same side. Please make sure the little arch card on the light strip connector should match the bulge on the control box connector.
Please make sure that your strip light is ON when plugged, firstly. Then pull out the remote insulated label when you use the remote; The remote should be faced with the raised-out IR receiver of the control box. Change a new CR-2025 battery to test.
You can cut RGB strip light along the marked lines. And you may need to buy 4 pin strip light connectors to connect the cutting pieces with original sections if you cut it.However, It's not recommended to cut Dreamcolor light strip since the leds are controlled by individual IC.
It's not recommended to connect multi light strips in a line because of the power issue.
DaveApril 3, 2019
Tested all the buttons and features including creating my own color. This LED strip works perfectly as intended. And my wife loves it!
BloopAugust 15, 2018
Good product good customer service. Had an issue and they were able to handle it like professionals.
SgtMassDecember 7, 2018
I bought these because I was looking for an under cabinet lighting option. I didn't just want white but something to change colors for seasons, parties or other occasions. I had an older strip led light similar to this but couldn't find the remote or power supply so I decided to order this one. When we received them we decided we were going to put them on the very top of our kitchen cabinets instead of underneath. We cleaned the top of the cabinets with alcohol and let them dry a bit before peeling and sticking the lights to the top. The 16..4 ft string of lights was perfect as it went from one end of the cabinets to the other. We now have lights that project a nice glow in the color of our choosing. Not to mention it's Christmas and we can have them flashing when we're not in the kitchen. It's definitely a cool look with just solid colors or a slow fade in and out. These are a huge improvement over previous styles we've had and looked at. The strip is covered with a rounded, clear, flexible coating which means they can also be used outdoors. The coating also protects the LEDs from getting damaged. Will be ordering more for other projects around the house.